1. No need for auxiliary processing, drilling and tapping directly on the base material, which greatly saves construction time. 2. excellent performance: high tough pull and maintain power, not easy to loose. 3. Surface treatment: ordinary, True color
This machine is mainly used for sanding type sanding in resin sand and water glass sand molding. It can also be used for the crushing of clay sand or other self-hardening sand sand.
We supply high quality dewatering screw press. Now more than 80% of our products are exported to Southeast Asia, The Middle East, Europe, North America, Central, and South America areas, Africa and other countries worldwide. We are expecting become your l
Installing a side-entry mixer in the oil tank, is used for mixing oils or other medium and then reach the purpose of harmonization, heat transfer, homogenization and prevention of sediment accumulation.
1. Whole machine electric parts was choice the domestic famous brand, good quality and steady.2. Complete machine baffle and important parts used the temper for decrease the metal internal force; and that parts are made by high precision processing center
The process of blow molding machine is using preformsto make plastic bottles. The preforms are produced with the necks of the bottles, including threads on one end. The preforms are heated typically by infrared heater, then blown using high-pressure air i
JL-250III Softgel Encapsulation Machine is newly designed high speed servo motor machine; It is applied into many kinds of fields, like pharmaceutical industry, veterinary medicine industry
The cooking tank is mainly used for freshness retaining,cooking and storage of liquid materials,milk station,slaughter house,dairy products, food, beverage, medicine etc.
Milk cooking tank consists of two major parts. One is refrigeration units and the other is tank body. Tank body made of high quality AISI stainless steel (food grade); insulation layer use polyurethane foam one time forming.
Mobile boat hoist crane is widely used for lifting boat on the deck ,in the port or in the boat factory to make the boat ship into or out of the water smoothly by lifting operation.
CIR150 Low Air Pressure DTH Hammers What is Low air pressure DTH hammer ? Low air pressure DTH hammer is widely used in geotechnical engineering in a variety of hard, high hardness and other toughness can be poor tough rock, the following characteristics:
Powder coating line with pretreatment system for ceiling is popularly installed for every ceiling manufacturer to provide full solutions for different custom requirements.
Refrigerant Evaporative Condenser Introduction The refrigerant evaporative condenser is a device that spray water of partial evaporation absorb the heat of high temperature gaseous refrigerant, then it is cooled from gas to liquid. In the refrigeration sy
1. Product introduction of the PTO type flat die wood pellet machine ① Wood pellet machine can press nearly all kinds of wood sawdust into wood pellets. ② PTO type, there is no engine on the machine, you can use PTO shaft to connect the machine together w